ADR Compliance

When to use

Use this skill when:

• creating a new ADR
• reviewing a submitted ADR for approval
• validating that a change requiring an ADR has one
• checking that an ADR correctly references affected standards
• generating an ADR draft on behalf of a human author

---

1. When an ADR is Required

An ADR MUST be created for:

• AD-01: Architectural changes (new patterns, new boundaries, structural refactoring)
• AD-02: Technology or framework additions (new dependency, new platform, new language)
• AD-03: Breaking changes to APIs, events, or data contracts
• AD-04: Security posture changes (auth method, encryption change, new exposure)
• AD-05: Deviation from any active standard or policy
• AD-06: Data migration or schema evolution affecting production data
• AD-07: Performance-impacting changes (new caching strategy, query changes on hot paths)
• AD-08: Governance or standards modifications

If uncertain whether an ADR is needed: create one. The cost is low; the cost of undocumented decisions is high.

---

2. ADR File Naming & Location

• AD-09: ADRs MUST be stored under .specs/decisions/.
• AD-10: File name MUST follow: ADR-XXXX-<kebab-case-title>.md
  • Example: ADR-0012-adopt-event-sourcing-for-audit-trail.md
• AD-11: XXXX is a zero-padded sequential number.
• AD-12: Numbers MUST NOT be reused, even if an ADR is deprecated or superseded.

---

3. Required Sections & Content

Every ADR MUST contain all of the following sections:

3.1 Header

# ADR-XXXX — [Short Title]
**Status:** Draft | Proposed | Accepted | Deprecated | Superseded by ADR-XXXX
**Date:** YYYY-MM-DD
**Authors:** [name(s)]
**Approved by:** [name(s)] (required before Accepted status)

3.2 Context

• AD-13: Describe the situation, problem, or requirement that necessitates a decision.
• AD-14: Reference the relevant standards, constraints, or business drivers.
• AD-15: Context MUST be factual — not the decision itself.

3.3 Decision

• AD-16: State the decision clearly and unambiguously.
• AD-17: Use active voice: "We will adopt...", "The system will use...", "This service MUST...".
• AD-18: The decision MUST be actionable — agents and engineers must be able to implement from it.

3.4 Alternatives Considered

• AD-19: At least one alternative MUST be documented.
• AD-20: Each alternative MUST include: description, pros, cons, and reason it was not chosen.
• AD-21: "Do nothing" is always a valid alternative and MUST be evaluated.

3.5 Consequences

• AD-22: List positive consequences (benefits, improvements).
• AD-23: List negative consequences (trade-offs, risks, debt introduced).
• AD-24: Mitigation plan for identified risks MUST be included.
• AD-25: Impact on existing components, services, or standards MUST be described.

3.6 Affected Standards

• AD-26: List every spec, standard, or policy this ADR modifies, deviates from, or supersedes.
• AD-27: Include the specific section or rule ID that is affected.
• AD-28: If this ADR introduces a new exception, state the exception scope and expiry date.

---

4. Status Lifecycle

Draft → Proposed → Accepted
                  ↘ Deprecated
                  ↘ Superseded by ADR-XXXX

• AD-29: Draft — work in progress, not yet reviewable.
• AD-30: Proposed — ready for review; must not be implemented until Accepted.
• AD-31: Accepted — approved by authorized owner; implementation may proceed.
• AD-32: Deprecated — decision is no longer in effect; superseding context must be explained.
• AD-33: Superseded — replaced by a newer ADR; reference to successor MUST be included.
• AD-34: Implementation MUST NOT begin until status is Accepted.

---

5. Approval Requirements

• AD-35: ADRs affecting architecture require approval from: Platform Architecture Owner or Staff Engineer.
• AD-36: ADRs affecting security posture require approval from: Security Owner.
• AD-37: ADRs affecting governance or standards require approval from: Engineering Leadership.
• AD-38: ADRs for local service deviations (no cross-team impact) require approval from: Tech Lead of the affected team.
• AD-39: Self-approval is forbidden — the author MUST NOT be the sole approver.

---

6. ADR Immutability Rules

• AD-40: Accepted ADRs MUST NOT be edited to change the decision retroactively.
• AD-41: If a decision changes, a new ADR MUST be created with Supersedes: ADR-XXXX.
• AD-42: Corrections to typos or formatting are allowed without creating a new ADR.
• AD-43: Context updates that do not change the decision are allowed with a changelog note in the ADR.

---

7. ADR Draft Template

When generating an ADR draft, use this structure:

# ADR-XXXX — [Short Title]
**Status:** Draft
**Date:** YYYY-MM-DD
**Authors:** [name]
**Approved by:** —

---

## Context
[Describe the problem or situation requiring a decision.]

## Decision
[State clearly what has been decided.]

## Alternatives Considered

### Option A — [Name]
- **Description:** ...
- **Pros:** ...
- **Cons:** ...
- **Rejected because:** ...

### Option B — Do Nothing
- **Description:** Maintain current approach.
- **Pros:** No disruption.
- **Cons:** [Why this is insufficient.]
- **Rejected because:** ...

## Consequences

### Positive
- ...

### Negative / Trade-offs
- ...

### Risks & Mitigations
- **Risk:** ...  **Mitigation:** ...

## Affected Standards
- [Standard name] — [Section/rule affected]

---

Examples

✅ Good: ADR-0007 with all sections, alternatives, explicit risks, approved by Platform Architect.
✅ Good: ADR that supersedes ADR-0003 and clearly explains why the old decision is no longer valid.

❌ Bad: ADR with only Context and Decision sections — missing Alternatives and Consequences.
❌ Bad: ADR in Accepted status with no approver listed.
❌ Bad: Implementation proceeding while ADR is still in Draft status.

Quick Mode

For low-context activation, load .enterprise/governance/agent-skills/adr-compliance/SKILL-QUICK.md or QUICK.md first. Load this full skill for deep analysis, violation fixing, or formal review gates.