Shillwood Launch — one-tx token launch on Robinhood (Shillwood)

Launch a fully-wired, liquidity-locked token on the Robinhood chain by calling the LIVE Shillwood factory. This is the Uniswap-V4 port of the Base "Unrugable" launcher: one transaction, liquidity locked forever, three sell walls, and a thirds "network cut" that feeds the MfT meme reactor. Nothing to configure — the factory bakes it all in.

⚠️ CHAIN: Robinhood (chain 4663) — NOT Base

This launch happens on the Robinhood chain (4663), not Base. You MUST send the transaction on Robinhood. RPC: https://rpc.mainnet.chain.robinhood.com. If your tool cannot transact on Robinhood, STOP and say so — do NOT fake a launch.

The call (this is the whole thing)

On Robinhood, call launch on the Shillwood factory:

• Factory (copy VERBATIM, never retype or reconstruct): 0xca800407BF99a0d654E2605160c8581Ef3dcCE70
• Function: launch(string name, string symbol, address customUpstream)
• Args: (name, symbol, 0x0000000000000000000000000000000000000000) — the third arg is ALWAYS the zero address (uses the factory's default reactor). Never put anything else there.
• Value: 0 (no ETH needed — the walls are seeded from the token's own supply).
• Returns: (address tokenAddr, address reactorAddr).

That's it. The factory mints 1B supply, builds the locked sell-walls, clones the reactor, and wires the network cut — all in one tx.

Steps

1. Parse the token NAME and SYMBOL from the request. These are the ONLY two inputs. If either is missing, ASK for it — do not guess.
2. Send the launch tx on Robinhood (see above). Wait for it to confirm.
3. Read the new token address from the tx return value / the Launched event. Do NOT fabricate it — only report an address that came out of the ACTUAL tx receipt.
4. Reply to the requester with the confirmation below.

Reply format

🏹 Launched $SYMBOL on Shillwood!

Token: <tokenAddr>

Liquidity locked forever · fees feed the grove 🌱
part of the BNKR extended family

One cashtag ($SYMBOL) only. Never tag @bankrbot. Use the REAL token address from the tx.

Set the token logo from the post image (optional but encouraged)

If the launch request's X post has an image attached, use it as the new token's logo — one extra call, no chain tx:

1. Get the post's image bytes, encode as a data URL: data:image/png;base64,<…> (PNG, JPG, or WEBP; ≤ 1 MB; NOT SVG).
2. POST to https://tasern.quest/api/shillwood/image with JSON body:

   { "image": "data:image/png;base64,<…>", "tokenAddress": "<the new token address>" }

3. Success returns { "ok": true, "url": "https://tasern.quest/token-art/<addr>.png" } — that's the token's logo, and it shows in the Shillwood gallery.

Notes:

• The endpoint only accepts a real on-chain Shillwood launch address (the token you just launched qualifies) — no API key needed.
• No overwrite: a token's logo can be set only ONCE — get it right the first time.
• No image on the post → skip this. The launch is already complete; the logo is a bonus.
• This is an off-chain image upload, not a transaction.

Rules (foolproof)

• NEVER fabricate the token address — report only the address from the actual launch tx receipt. If the tx didn't confirm, say it failed; do not invent an address.
• The factory address is FIXED — 0xca800407BF99a0d654E2605160c8581Ef3dcCE70, copied verbatim. Never retype or reconstruct it.
• customUpstream is ALWAYS 0x0 (the default reactor). Nothing else goes there.
• Only launch on an explicit request. A launch is real and permanent.
• If you can't transact on Robinhood, STOP and report it — never fake a launch.

Verified on-chain (2026-07-19)

Factory 0xca800407BF99a0d654E2605160c8581Ef3dcCE70 — live (16,304 bytes), source-verified, launchCount()=1 (proven). Wiring reads: owner()=project agent 0xE2a4…, trees()=GST 0x95eD511D…, money()=FTP 0x873739ae…, meme()=MfT twin 0x6ae5766…. launch(string,string,address) at Shillwood.sol L1196.