MakeMyClip Editor — Agent Skill

Drive a local video editor by chatting. When triggered, this skill shells out to the clip CLI via npx (auto-downloaded on first use, cached after). No MCP setup, no global install, no config edits.

When to invoke

Trigger this skill when the user asks to:

• Edit, trim, cut, or splice a video file
• Zoom, pan, or apply Ken Burns to a region of a clip
• Add captions, titles, or lower-thirds to footage
• Assemble multiple clips into one (concat, montage)
• Render a screen recording into a demo or social clip

Do not invoke for: pure transcription (use a speech-to-text skill), thumbnail-only image work, or live streaming.

How to use

Probe a media file (implemented)

npx -y @makemyclip/editor ingest <input>

Returns metadata as JSON — duration, video stream (codec, dimensions, fps), audio stream (codec, sample rate, channels), plus a deterministic mediaId derived from the absolute path:

{
  "mediaId": "m_a1b2c3d4e5f6",
  "ref": {
    "path": "/abs/path/screen.mp4",
    "durationSec": 83.5,
    "video": { "codec": "h264", "width": 1920, "height": 1080, "fps": 30 },
    "audio": { "codec": "aac", "sampleRate": 48000, "channels": "stereo" }
  }
}

Call this first to ground yourself in what the source actually contains — duration for trim calculations, dimensions for zoom/overlay placement, presence of audio before suggesting add_audio. Same input path always returns the same mediaId.

Split a clip at a point (implemented)

npx -y @makemyclip/editor split <input> <atSec>

Divides a clip into two halves at atSec. Stream-copy (no re-encode), so it's fast — both halves are produced in parallel. Returns paths to both:

{ "before": "/var/folders/.../split-before-abc.mp4", "after": "/var/folders/.../split-after-xyz.mp4", "atSec": 12.5, "durationMs": 38 }

Keyframe-accurate (not frame-exact) because stream-copy can't decode-and-cut mid-GOP. If you need a frame-exact split, run render first to re-encode, then split.

Trim a clip (implemented)

npx -y @makemyclip/editor trim <input> <start> <end>

Timecodes accept HH:MM:SS[.ms], MM:SS, or seconds as a number. The output is JSON:

{ "path": "/var/folders/.../makemyclip-editor/trim-abc123.mp4", "durationMs": 14 }

Trim is stream-copy (no re-encode), so it's fast and lossless. Output lands in $MAKEMYCLIP_WORKSPACE (defaults to os.tmpdir()/makemyclip-editor).

Add a text overlay (implemented)

npx -y @makemyclip/editor add_text <input> <text> <position> <startSec> <endSec>

Burns a text overlay into a copy of the video.

• <position> is one of: top-left, top-center, top-right, center-left, center, center-right, bottom-left, bottom-center, bottom-right
• <startSec> / <endSec> are seconds from the start of the input
• Defaults: font size 48, white text, translucent black background box for readability

Returns JSON:

{ "path": "/var/folders/.../makemyclip-editor/add-text-abc123.mp4", "durationMs": 412 }

The text is written to a temp file before being passed to ffmpeg, so quotes, colons, commas, brackets, and most Unicode work without manual escaping. Caveat: literal %{...} in the text would be interpreted as a drawtext expression (rare in real captions; avoid).

Stitch clips together (implemented)

npx -y @makemyclip/editor concat <input1> <input2> [<input3> ...]

Concatenates two or more clips back-to-back into a single output, stream-copy (no re-encode), so it's fast and lossless.

Returns JSON:

{ "path": "/var/folders/.../makemyclip-editor/concat-abc123.mp4", "durationMs": 95, "inputCount": 3 }

All inputs must have matching codecs and resolution; if they don't, ffmpeg will fail with a clear error and the agent should re-encode (e.g. via add_text with a no-op text, or a future render call) before concatenating. The combined trim → concat flow is the bread-and-butter highlight-reel workflow: trim N segments, then concat them in order.

Extract a preview frame (implemented)

npx -y @makemyclip/editor preview <input> <atSec>

Extracts a single JPEG frame at the given timecode. Use this after every mutating edit to verify the output before moving on — text overlays land where you intended, trim cuts at the right point, concat seams line up. Returns JSON:

{ "path": "/var/folders/.../makemyclip-editor/preview-abc123.jpg", "atSec": 1.5, "durationMs": 12 }

Fast (~10-50 ms) because it uses ffmpeg's input-seek (-ss before -i) — keyframe-accurate, not frame-exact, which is fine for thumbnails. The user can open the JPEG to confirm; agents that support image inputs can read it back to self-correct.

Transition between two clips (implemented)

npx -y @makemyclip/editor transition <inputA> <inputB> [<kind>] [<durationSec>]

Crossfades, slides, or fades-through-black/white between two clips. The tool auto-probes clip A to compute the right offset, so the agent never has to know clip durations.

• <kind> is one of: fade, fadeblack, fadewhite, dissolve, wipeleft, wiperight, wipeup, wipedown, slideleft, slideright, circleopen, circleclose. Defaults to fade (safest, most invisible).
• <durationSec> defaults to 1. Capped at 10.

Returns JSON:

{ "path": "/var/folders/.../makemyclip-editor/transition-abc.mp4", "durationMs": 320, "offsetSec": 4, "hasAudio": true }

Audio: if both inputs have audio, the tool wires an acrossfade of the same duration. If neither has audio, the output is silent. If exactly one has audio, the tool fails with a clear message — re-encode the silent one with a silent audio track first.

Combined with concat and add_text, this is the polish layer that makes multi-clip outputs feel intentional rather than abrupt.

Re-encode for export or normalization (implemented)

npx -y @makemyclip/editor render <input> [<format>] [<crf>] [<preset>] [<maxWidth>]

Re-encodes a video to a specific format/quality. Useful for final export, normalizing inputs before concat/transition when codecs don't match, or downsizing for web delivery.

• <format> is one of: mp4 (default, h264+aac), mov (h264+aac), webm (vp9+opus)
• <crf> is the quality knob (0 = lossless, 51 = worst). Default 23 is a good baseline; lower for higher quality
• <preset> controls libx264 speed/efficiency tradeoff: ultrafast … veryslow. Default medium. Ignored for webm
• <maxWidth> (optional) caps width in pixels. Preserves aspect ratio; never upscales

Returns JSON:

{ "path": "/var/folders/.../makemyclip-editor/render-abc.mp4", "format": "mp4", "durationMs": 412 }

Add audio — mix or replace (implemented)

npx -y @makemyclip/editor add_audio <input> <audio> [<mode>] [<audioVolume>] [<startSec>]

Add a background-music bed, a voiceover, or replace the original audio entirely.

• <mode> is mix (default — keeps base audio, overlays new audio) or replace (drops base audio, uses new audio only)
• <audioVolume> is the overlay volume multiplier (0–2, default 0.5 — sensible background-music level; use 1.0 for voiceover)
• <startSec> is when the overlay starts (default 0)

Returns JSON:

{ "path": "/var/folders/.../makemyclip-editor/add-audio-abc.mp4", "mode": "mix", "durationMs": 412 }

Mix mode requires the input video to have an audio track (use ingest to confirm first). Output duration matches the original video — overlay audio is truncated if longer, padded with silence if shorter.

Crop / rotate / flip / scale (implemented)

npx -y @makemyclip/editor transform crop   <input> <x> <y> <width> <height>
npx -y @makemyclip/editor transform rotate <input> <90|180|270>
npx -y @makemyclip/editor transform flip   <input> <horizontal|vertical>
npx -y @makemyclip/editor transform scale  <input> [<width>] [<height>]

Geometric operations on a single video. transform scale uses -2 for an omitted dimension (auto-fit preserving aspect, even-pixel for H.264). Rotation is 90° increments only — for arbitrary angles, use render with a custom filter graph.

Adjust color / brightness / contrast / saturation / volume (implemented)

npx -y @makemyclip/editor adjust <input> --brightness N --contrast N --saturation N --volume N

One unified panel. Any subset of knobs can be set; at least one is required.

Knob	Range	No-op value
--brightness	-1 (black) … 1 (white)	0
--contrast	0 … 4	1
--saturation	0 (grayscale) … 3 (vivid)	1
--volume	0 (mute) … 2 (double)	1

Stream-copies whichever stream isn't being adjusted (e.g. only --volume set → video stream-copies, fast).

Speed up / slow down / reverse (implemented)

npx -y @makemyclip/editor speed <input> [<factor>] [<reverse>]

Multiplier semantics: factor=2 is double speed, factor=0.5 is half (slow-mo). reverse=true plays backwards (audio reversed too). Either factor != 1 or reverse=true is required (no-ops are rejected).

Audio handling uses atempo which is range-limited to [0.5, 2.0]; wider factors chain multiple atempo links internally so factor=4 and factor=0.125 both work.

Picture-in-picture / image overlay (implemented)

npx -y @makemyclip/editor overlay <base> <overlay> [<position>] [<scaleToWidth>] [<startSec>] [<endSec>]

Place a video or image on top of the base. Same 9 named positions as add_text. Optional scaleToWidth to resize the overlay first (height auto-fits even-pixel). Optional time window via startSec + endSec (or just startSec for "from this moment to the end").

Ken Burns / focus zoom (implemented)

npx -y @makemyclip/editor zoom_pan <input> [<fromZoom>] [<toZoom>] [<centerX>] [<centerY>]

Smoothly zoom from fromZoom to toZoom over the full clip duration, centered on (centerX, centerY) in normalized [0, 1] coordinates. Defaults: fromZoom=1, toZoom=1.5, center is (0.5, 0.5). Use fromZoom > toZoom for zoom-out. Tool probes the input to match output resolution and fps.

Add a title card (implemented)

npx -y @makemyclip/editor add_title_card <input> <text> [<durationSec>] [<background>] [<fontSize>] [<fontColor>]

Generates a full-screen colored card (default 2 s, black background, white text) with centered title, then concatenates it before the input. Auto-probes the input to match dimensions, fps, and audio sample rate so the join is seamless.

Add multiple captions in one call (implemented)

npx -y @makemyclip/editor add_captions <input> <cuesJson>

cuesJson is a JSON array of { text, startSec, endSec, position? }. Loops add_text per cue. Does not transcribe — the agent (or user) supplies the cues. Composability beats coupling: pair this with a separate transcription step when needed.

Remove silence (implemented)

npx -y @makemyclip/editor silence_remove <input> [<noiseDb>] [<minSilenceSec>]

Detects silent regions via ffmpeg's silencedetect filter, then trims the non-silent regions and concatenates them. Defaults: noiseDb=-30, minSilenceSec=0.5. Pure-FFmpeg, no Python auto-editor dependency.

Build a highlight reel (implemented)

npx -y @makemyclip/editor highlight_reel <input> <segmentsJson> [<transitionKind>] [<transitionSec>]

segmentsJson is a JSON array of { startSec, endSec }. Trims each segment in parallel (stream-copy, fast), then either concatenates with hard cuts (no transitionKind) or chains the transitions tool pairwise to crossfade between them. The classic "best moments of a long video" workflow as a single agent-callable tool.

Green-screen / color keying (implemented)

npx -y @makemyclip/editor chroma_key <foreground> <background> [<color>] [<similarity>] [<blend>]

Removes a color from the foreground video and composites it over the background. The background can be a video OR a still image (auto-detected, looped to match foreground length).

• <color> defaults to green. Named colors, #RRGGBB, or 0xRRGGBB
• <similarity> (0..1, default 0.3) — how close a pixel must be to count as the key color
• <blend> (0..1, default 0.1) — soft-edge amount; 0 = hard cut, higher = softer

Audio is taken from the background by default (the "scene"). Override with preferForegroundAudio=true if the foreground holds the voice.

Stabilize shaky footage (implemented)

npx -y @makemyclip/editor stabilize <input> [<shakiness>] [<smoothing>] [<accuracy>] [<zoom>]

Two-pass vidstab: pass 1 (vidstabdetect) analyzes motion and writes a transforms file; pass 2 (vidstabtransform) warps each frame to follow a smoothed camera path. Defaults are sensible (5, 10, 9, 5) — bump shakiness for very erratic input, smoothing for a more cinematic feel, zoom to hide warp borders.

Requires vidstab-enabled ffmpeg. The bundled ffmpeg-static includes it; the tool fails with a clear error otherwise.

Open the local UI (implemented)

npx -y @makemyclip/editor ui

Starts a tiny local server on http://127.0.0.1:5573 and opens your browser. The UI renders the session log (every op the agent has run), shows result paths and timestamps, and lets the user click an op to play its output. Useful as a companion to the chat-driven workflow — the user can watch the session evolve in real time and check outputs without touching the terminal.

Local-only. The UI includes drag-drop import, a horizontal timeline of every clip the session produced, a render queue, a chat sidebar that talks to the same agent, snapshot/undo, and keyboard shortcuts — so the user can take over visually whenever the agent goes off-script.

Session safety — snapshot, undo, inspect, delete (implemented)

Every successful tool call is logged to $MAKEMYCLIP_WORKSPACE/session.json. The agent can inspect that log, snapshot the current state, undo, or remove individual ops.

npx -y @makemyclip/editor snapshot [<label>]            # Save the current session as <label>.json (default: snap-<N>)
npx -y @makemyclip/editor undo [<snapshotLabel>]        # Pop the last op, OR restore a named snapshot
npx -y @makemyclip/editor inspect [<limit>]             # Show recent ops with one-line summaries
npx -y @makemyclip/editor delete <id> [<removeFile>]    # Remove an op (and optionally unlink its output file)

These are the recovery loop the council called must-haves. Snapshot before any uncertain edit; undo if it didn't land right; inspect to remember what you did.

Safety

• FFmpeg is spawned with arguments as an array — no shell interpolation, no injection.
• All file paths resolve against a workspace directory by default.
• The skill makes no network calls beyond the one-time npx download of the package itself.

Install

npx skills add MakeMyClip/editor

That's it.

License

MIT. See LICENSE.